| 1. | Yilmaz, R., Arikan, H., Durgut, Y., Hamarat, A. "Determination of Parameters Generating the Reference Pressure in the Primary Level Dynamic Pressure Measurement System Based on the Drop Weight Method", Metrology and Measurement Systems, 31:1 (2024) : 85-102 |
| 2. | Hamarat, A., Yilmaz, R., Durgut, Y., Demir, E. "Calibration of Pressure Balances, 11th International Advances in Applied Physics and Materials Science Congress and Exhibition, Fethiye, 17 October-21 October 2021", AIP Conference Proceedings, 2803:1 (2023) : Article number 030006 |
| 3. | Yilmaz, R., Arikan, H., Durgut, Y., Hamarat, A. "The Influence of Liquids on Dynamic Pressure Transducers Performance by Using Dropping Mass Method, 11th International Advances in Applied Physics and Materials Science Congress and Exhibition, Fethiye, 17-21 October 2021 ", AIP Conference Proceedings, 2803:1 (2023) : Article number 030005 |
| 4. | Durgut, Y., Yilmaz, R., Hamarat, A. "Inter-Laboratory Pressure Comparison Measurement in Hydraulic Medium up to 400 MPa Range, 11th International Advances in Applied Physics and Materials Science Congress and Exhibition, Fethiye, 17-21 October 2021", AIP Conference Proceedings, 2803:1 (2023) : Article number 030004 |
| 5. | Erdol, M., Konukman, A.E.S., Oktem, A.S. "Investigation of Young''s Modulus of Defective Graphene-Reinforced Epoxy at Different Weight Ratios by Molecular Dynamics", Polymer Composites, 44:9 (2023) : 5852-5866 |
| 6. | Durgut, Y. "Metrological Characterisation of Force-Balanced Piston Gauge", MAPAN-Journal of Metrology Society of India , 38:1 (2023) : 147-159 |
| 7. | Saxholm, S., Hogstrom, R., Sarraf, C., Sutton, G., Wynands, R., Arrhen, F., Jonsson, G., Durgut, Y., Peruzzi, A., Fataev, A., Liverts, M., Adolfse, C., Oster, A. "Development of Measurement and Calibration Techniques for Dynamic Pressures and Temperatures (DynPT): Background and Objectives of the 17IND07 DynPT Project in the European Metrology Programme for Innovation and Research (EMPIR)", Journal of Physics: Conference Series = 6th TC16 Conference on Pressure and Vacuum Measurement 2022, Together with the 24th TC3 Conference on the Measurement of Force, Mass and Torque, the 14th TC5 Conference on the Measurement of Hardness, and the 5th TC22 Conference on Vibration Measurement, Cavtat-Dubrovnik, 11-13 October 2022, 1065:doi:10.1088/1742-6596/1065/16/162015 (2022) : Article Number 162015 |
| 8. | Turk, A., Hamarat, A., Durgut, Y. "Design of Semi-Automated Calibration System for Pressure Balances", Metrology and Measurement Systems , 29:4 (2022) : 623-638 |
| 9. | Durgut, Y. "Metrological Characterisation of Force-Balanced Piston Gauge up to 15,000 Pa Pressure Range", Mapan - Journal of Metrology Society of India, -:DOI:10.1007/s12647-022-00586-x (2022) : 1-13 |
| 10. | Durst, F., Breuer, M., Unsal, B., Haddad, K. "Laminar-to-Turbulent Transition of Pipe Flows Triggered by Wall-Mounted, Ring-Type Obstacles", Journal of Turbulence, 7:23 (2022) : 382-404 |
| 11. | Kroner, C., Akselli, B., Benková, M., Borchling, A., Buker, O., Christoffersen, N., Pavlas, J., Schumann, D., Seypka, V., Unsal, B., Warnecke, H. "Evaluation of the Measurement Performance of Water Meters Depending on Water Quality", Water Supply, 22:4 (2022) : 4700-4715 |
| 12. | Warnecke, H., Kroner, C., Ogheard, F., Kondrup, J.B., Christoffersen, N., Benkova, M., Buker, O., Haack, S., Huovinen, M., Unsal, B. "New Metrological Capabilities for Measurements of Dynamic Liquid Flows", Metrologia, 59:2 (2022) : Article Number 025007 |
| 13. | Turk, A., Aksulu, M., Meral, I. "Effective Area Calculation of Pressure Balances by Means of Dimensional Measurements Method ", Measurement : Sensors, 18:DOI 10.1016/j.measen.2021.100345 (2021) : Article number 100345 |
| 14. | Turk, A., Hamarat, A., Karaboce, B. "Comparison of Manual and Automated Pressure Calibration Methods of Medical Pressure Calibrator", 15th IEEE International Symposium on Medical Measurements and Applications (MeMeA 2020) Bari, 1-3 June 2020, -:doi: 10.1109/MeMeA49120.2020.9137288 (2020) : Article number 9137288 |
| 15. | Durgut, Y., Vámossy, C., Petrovski, N., Kacarski, V., Tomcini, B., Djuri?, P., Vuli?, A., Al-Jattal, N., Justice, B., Alotaibi, H., Alanazi, N., Dapkeviciene, K., Brzozowski, A., Setina, J., Bermanec, L. "Final report on Supplementary Comparison in Hydraloic Media in the Range from 10 MPA to 100 MPA at Gauge Mode", Metrologia, 57:1A (2020) : Article number 07020 |
| 16. | Altintas, A., Kocas, I., Durgut, Y., Bartolo, J., Bergoglio, M., Bermanec, L., Bo?njakovi?, A., Burzi?, S., Condereys, A., Dobre, M., Farar, P., Hetherington, P., Medina, N., Sabuga, W., Ott, O., Konczak, T., Sandu, I., Setina, J., Steindl, D., Vámossy, C., Waller, B., Wuethrich, C., Brzozowski, A., Geel, J., Saxholm, S. "Final Report on Key Comparison EURAMET.M.P-K1.c in the Range 0.7 MPa to 7.0 MPa of Gas Gauge Pressure", Metrologia, 57:1A (2020) : Article number 07022 |
| 17. | Durgut, Y., Yilmaz, R., Justice, B., Alotaibi, H., Alanazi, N. "Supplementary Pressure Comparison from (0.7 to 7) MPa in Gas Media at Gauge Mod", Metrologia , 57:Technical Supplement 1A (2020) : Article number 07014 |
| 18. | Turk, A., Hamarat, A. "Automated Pressure Calibration of Blood Pressure Measuring Device Calibrator to Realize Its Traceability", IEEE International Symposium on Medical Measurements and Applications (MeMeA 2019), Kadir Has University, Istanbul, 26-28 June 2019, -:June (2019) : Article number 8802215 |
| 19. | Sinir, E., Durgut, Y., Rosu, D., Pra?ak, D. "Towards the Harmonization of Medical Metrology Traceability in Europe: An Impact Case Study Through Activities in Turkey & EMPIR Project inTENSE", IEEE International Symposium on Medical Measurements and Applications (MeMeA 2019), Kadir Has University, Istanbul, 26-28 June 2019, -:June (2019) : Article number 8802141 |
| 20. | Durgut, Y. "Metrological Characterization of Non-Rotating Low-Pressure (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:16 / Article number 162001 (2018) : 1-5 |
| 21. | Durgut, Y., Aydemir, B., Bagci, E., Aksahin, E., T. Ince, A. "Development of Dynamic Calibration Machine for Pressure (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:16/Article number 162013 (2018) : 1-5 |
| 22. | Bentouati, D., Durgut, Y., Otal, P., Plimmer, M., Pra?ák, D., Sabuga, W., Ehlers, S., Sinir, E. "Calibration Methods for Negative Gauge Pressure Down to ?100 kPa", Measurement Science and Technology, 29:3 (2018) : 1-10 |
| 23. | Otal, P., Boineau, F., Sabuga, W., Durgut, Y. "URAMETMP-S9 / EURAMET 1170, LOOP2. Comparison in the negative gauge pressure range-950 to 0 hPa", Metrologia , 54:1A Technical Supp. (2017) : 07004 |
| 24. | Durgut, Y., Bagci, E., Aksahin, E., Ince, A.T. "An Investigation on Characterization of Dynamic Pressure Transducers Using Material Impact Test Machine", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39:9 (2017) : 3645?3655 |
| 25. | Saxholm, S., Otal, P., Altintas, A., Grgec Bermanec, L., Durgut, Y., Hanrahan, R., Kocas, I., Lefkopoulos, A., Prazak, D., Sandu, I., Setina, J., Spohr, I., Steindl, D., Tammik, K., Testa, N. "EURAMETMP-S9/EURAMET 1170, LOOP1 Comparison in the negative gauge pressure range-950 to 0 hPa", Metrologia, 53:Technical Supplement (2016) : 07010 |
| 26. | Durgut, Y. "Final Report on Key Comparison EURAMET.M.P-K13 in the Range 50 MPa to 500 MPa of Hydraulic Gauge Pressure", Metrologia , 52:Technical Supplement (2015) : - |
| 27. | Bilgic, E., Durgut, Y. "Effects of Waveform Model on Sensitivity Values of Transducers Used in Mechanical Dynamic Measurements ", Acta Physica Polonica A, 128:2-B (2015) : B-267-B-270 |
| 28. | Durgut, Y. "Final report of EURAMET 1197: Supplementary Bilateral Comparison of Hydraulic Gauge Pressure Standards up to 50 MPa", Metrologia, Volume 49:Technical Supplement (2012) : - |
| 29. | Kocas, I., Bergoglio, M. "An Investigation of Quartz Type Pressure Transducer Behaviour under Continuous Pressure Conditions and Metrological Characterization", Measurement, 45:10 (2012) : 2486–2489 |
| 30. | Kocas, I., Sariyerli, G. "The Characterization of New VGMS (Vacuum Gauge Metrology System) by the Traceability of Multi Stage Static Expansion System", Measurement, 45:10 (2012) : 2430-2433 |
| 31. | Kartal Dogan, A., Bonnier, G., Uytun, A., Kocas, I., Durgut, Y. "Toward Carbon Dioxide Vapor-Pressure Thermometer", International Journal of Thermophysics, 32:11 (2011) : 2230-2238 |
| 32. | Kavasoglu, A., Birgi, O., Kavasoglu, N., Oylumluoglu, G., Kodolbas, A.O., Kangi, R., Yilmaz, O. "Electrical Characterization of a-Si:H(n)/c-Si(p) Structure", Journal of Alloys and Compounds, 509:39 (2011) : 9394?9398 |
| 33. | Kocas, I., Legras, J., Otal, P. "Final Report on EUROMET.M.P-S4: Bilateral Pressure Comparison in Gas Media Between LNE (France) and UME (Turkey) (Gauge Mode) in the Range from 0.04 MPa to 1.75 Mpa", Metrologia, 45:Technical Supplement (2008) : 1-16 |
| 34. | Sabuga, W., Molinar, G., Buonanno, G., Esward, T., Legras, J., Yagmur, L. "Finite Element Method Used for Caculation of the Distortion Coefficient and Associated Uncertainty of a PTB 1 BPa Preesure Balance-EUROMET Project 463", Metrologia, 43:3 (2006) : 311–325 |
| 35. | Sabuga, W., Molinar, G., Buonanno, G., Esward, T., Rabault, T., Yagmur, L. "Calculation of The Distortion Coefficient and Associated Uncertainty of PTB and LNE 1 Gpa Pressure Balances Using Finite Element Analysis-EUROMET Project 463", Metrologia, 42:6 (2005) : S202–S206 |
| 36. | Molinar, G., Bergoglio, M., Sabuga, W., Otal, P., Ayyildiz, G., Verbeek, J., Farar, P. "Calculation of Effective Area A0 for Six Piston-Cylinder Assemblies of Pressure Balances. Results of the EUROMET Project 740", Metrologia, 42:6 (2005) : S197–S201 |
| 37. | Jousten, K., Bergoglio, M., Calcatelli, A., Durocher, J., Greenwood, J., Kangi, R., Legras, J., Matilla, C., Setina, J. "Results of The Regional Key Comparison EUROMET.M.P-K1.B In The Pressure Range From 3×10-4 Pa to 0.9 Pa", Metrologia, 42:Technical Supplement (2005) : 07001 |
| 38. | Orhan, M., Calkin, Y., Tesar, J., Krajicek, K. "Pneumatic Gauge Pressure Comparison Measurements Between the UME (Turkey) and the CMI (Czech Republic)-EUROMET Project No: 537", Metrologia, 38:2 (2001) : 173-179 |
| 39. | Orhan, M., Dogan, C., Kocabas, H., Tepehan, G. "Experimental Strain Analysis of the High Pressure Strain Gauge Pressure Transducer and Verification by Using Finite Element Method", Measurement Science and Technology, 12:3 (2001) : 335–344 |
| 40. | Orhan, H., Legras, J., Jager, J. "Establishment of Traceability of the UME Piston-Cylinder for the 0.5 GPa Range of Hydraulic Pressure, in Cooperation with the BNM-LNE and the PTB", Metrologia, 36:6 (1999) : 693-696 |
| 41. | Orhan, M., Kangi, R., Akgul, A., Molinar, G. "Pressure Comparison in the Range From 0.8 to 8 mPa Between the UME (Turkey) and the CNR-IMGC (Italy) in Gass Media and Gauge Mode", Measurement: Journal of the International Measurement Confederation, 22:1-2 (1997) : 47-55 |