| 1. | Kuzu, C., Jurbua, S.B. "Development of Transfer Standards for Traceability of Hardness Diamond Indenter Calibration Systems", Measurement : Sensor, -:Development of transfer standards for traceability of hardness diamond indenter calibration systems (2024) : Article number 101447 |
| 2. | Yandayan, T., Aksulu, M., Picotto, G.B., Astrua, M., Muñoz, R., Arce, A.A., Oraby, E., Trych-Wildner, A., Slusarski, L., Sosinowski, P., Bar?ic, G., ?imunovic, V. "Traceability Issues for Contact Probe and Stylus Instrument Measurements", 23rd International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2023), Copenhagen, 12-16 June 2023, -:- (2023) : 433-436 |
| 3. | Lassila, A., Byman, V., Kirchhoff, J., Aksulu, M., Ozaita, M., Carcedo, L. "EURAMET Supplementary Comparison EURAMET.L-S26.1, Measurement of Groove Depth Standards in the Range 5 μm up to 0.9 mm", Metrologia, 60:1A (2023) : Article number 04003 |
| 4. | Angnostou, M., Dahlan, A., Alsenaidi, M., Yandayan, T., Akgoz, S.A., Halim, M.R., Alqahtani, N., Alqahtani, F., Talha, Y.B., Almathkor, F., Habibi, S. "Supplementary Comparison - Calibration of Gauge Blocks by Mechanical Method", Metrologia, 60:1A (2023) : Article Number 04001 |
| 5. | Picotto , G., Matus, M., Gábor, S., Prieto , E., Ducho?, V., Toftegaard, J., Bandis, C., Bar?i? , G., Robert, S., Teodorescu, D., Gastaldi, B., Salgado, J., Bajic, G., Meli, F., Hanrahan, R., Jusko, O., Jusko, O., Äremann, M., Alqahtany, F., Aksulu, M., Koops, R., Lassila, A. "Calibration of Diameter Standards (EURAMET.L-K4.2015)", Metrologia, 58:1A (2021) : Article number 04004 |
| 6. | Turk, A., Aksulu, M., Meral, I. "Effective Area Calculation of Pressure Balances by Means of Dimensional Measurements Method ", Measurement : Sensors, 18:DOI 10.1016/j.measen.2021.100345 (2021) : Article number 100345 |
| 7. | Przyklenk, A., Balsamo, A., O'Connor, D., Evans, A., Yandayan, T., Akgoz, S.A., Flys, O., Phillips, D., Zeleny, V., Czulek, D., Meli, F., Ragusa, C.S., Bosse, H. "New European Metrology Network for Advanced Manufacturing", Measurement Science and Technology, 32:11 (2021) : Article number 111001 |
| 8. | Przyklenk, A., Balsamo, A., O'Connor, D., Evans, A., Yandayan, T., Akgoz, S.A., Flys, O., Zeleny, V., Czulek, D., Phillips, D., Meli, F., Ragusa, C. "AdvManuNet: Support for a European Metrology Network for Advanced Manufacturing", 21st International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2021) 7-10 June 2021, -:- (2021) : 321-322 |
| 9. | Kuzu, C., Pelit, E., Meral, I. "A New Design Of Rockwell-Brinell-Vickers Hardness Standard Machine at UME", Acta IMEKO, 9:5 (2020) : 230-234 |
| 10. | Bosse, H., Evans, A., Zeleny, V., Czu?ek, D., Balsamo, A., O'Connor, D., Yandayan, T., Billington, D., Meli, F., Ragusa, C., Flys, O. "AdvManuNet: A Networking Project on Metrology for Advanced Manufacturing", 20th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2020) Virtual, 8-12 June 2020, -:- (2020) : 357-358 |
| 11. | Brand, U., Matus, M., Carcedo, L., Slusarski, L., Picotto, G., Lassila, A., Hungwe, F., Flys, O., Aksulu, M., Kosteev, V. "Measurement of Groove Depth Standards in the Range 1 μm up to 1 mm (EURAMET project 1407)", Metrologia, 57:1A (2020) : Article number 04001 |
| 12. | Sendogdu, D., Yaman, O., Cetin, T., Hamid, R., Sahin, E., Senel, C., Asar, M., Alqahtani, N., Alqahtani, F., Talhh, Y., Almutari, A. "Report on Gulfmet Supplementary Comparison Measurement of Gauge Blocks by Interferometry (GULFMET.L-S2)(", Metrologia, 56:1A (2019) : Article number 04001 |
| 13. | Grubert, B., Kreitschik, D., Schnabel, O., Siewert, F., Geckeler, R.D., Schumann, M., Just, A., Krause, M., Yandayan, T., Akgoz, S.A. "A Precise Aperture Centring Device (ACenD) for Autocollimator-Based Surface Measuring Pro?lers", Proceedings of SPIE - The International Society for Optical Engineering, 11109:- (2019) : 1110902-1- 1110902-14 |
| 14. | Sendogdu, D., Yaman, O., Cetin, T., Hamid, R., Sahin, E., Senel, C., Asar, M., Alqahtani, N., Alqahtani, F., Talhh, Y., Almutari, A. "GULFMET.L-S2 : Report on GULFMET Supplementary Comparison Measurements of Gauge Blocks by Interferometry", Metrologia, 56:1A Technical Support (2019) : Article number 04001 |
| 15. | Yandayan, T. "High Precision (Advanced) Angle Metrology: Pushing the Limits for Nanoradian Uncertainty Demands (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:14/Article number 142002 (2018) : 1-5 |
| 16. | Akgoz, S.A., Yandayan, T. "High Precision Calibration of Polygons for Emerging Demands (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:14/Article number 142005 (2018) : 1-5 |
| 17. | Yandayan, T. "Determination of Correct Sign in Primary Angle Calibrations (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:14/Article number 142011 (2018) : 1-5 |
| 18. | Kuzu, C., Meral, I., Pelit, E. "Metrological Characterization of Hardness Indenter Calibration System (XXII World Congress of the International Measurement Confederation (IMEKO 2018))", Journal of Physics: Conference Series, 1065:6/Article number 062014 (2018) : 1-4 |
| 19. | Ahmedov, H., Korutlu, B., Ozgur, B., Yaman, O. "Alignment in UME Oscillating-Magnet Kibble Balance Experiment", Conference on Precision Electromagnetic Measurements (CPEM 2018), -:Article number 8501075 (2018) : 2 s. |
| 20. | Yandayan, T., Geckeler, R., Just, A., Krause, M., Akgoz, S.A., Aksulu, M., Grubert, B., Watanabe, T. "Investigations of Interpolation Errors of Angle Encoders for High Precision Angle Metrology", Measurement Science and Technology, 29:6 (2018) : 064007 |
| 21. | Yandayan, T. "A Portable Device for Calibration of Autocollimators with Nanoradian Precision", Proceedings of SPIE - The International Society for Optical Engineering, 10385:- (2017) : 1038509 |
| 22. | Yandayan, T. "Recent Developments in Nanoradian Angle Metrology", Proceedings of SPIE - The International Society for Optical Engineering, 10385:- (2017) : 1038509 |
| 23. | Quabis, S., Schulz, M., Ehret, G., Asar, M., Balling, P., Kren, P., Bergmans, R.H., Kung, A., Lassila, A., Putland, D., Williams, D., Piree, H., Prieto, E., Perez, M., Svedova, L., Ramotowski, Z., Vannoni, M., Hungwe, F., Kang, Y. "Intercomparison of Flatness Measurements of an Optical Flat at Apertures of up to 150?mm in Diameter", Metrologia, 54:1 (2017) : 85-93 |
| 24. | Yandayan, T., Geckeler, R.D., Aksulu, M., Akgoz, S.A., Ozgur, B. "Application of Advanced Shearing Techniques to the Calibration of Autocollimators with Small Angle Generators and Investigation of Error Sources", AIP Review of Scientific Instruments, 87:051903 (2016) : 1-13 |
| 25. | Matus, M., Haas, S., Piree, H., Gavalyugov, V., Tamakyarska, D., Thalman, R., Balling, P., Garnaes, J., Hald, J., Farid, N., Pietro, E., Lassila, A., Salgado, J., Lewis, A., Bandis, C., Mudronja, V., Banretti, E., Balsamo, A., Pedone, P., Bergmans, R., Kalsrson, H., Ramotowski, Z., Eusebio, L., Saraiva, F., Akgoz, S.A., Ganioglu, O., Sendogdu, D., Yandayan, T., Fira, R., Bergstand, S., Selenika, S., Franke, P., Duta, A. "Measurement of Gauge Blocks by Interferometry", Metrologia, 53:Technical Supplement (2016) : 04003 |
| 26. | Thalman, R., Nicolet, A., Meli, F., Picooto, G., Matus, M., Carcedo, L., Hemming, B., Ganioglu, O., Chiffre, L., Saraiva, F., Bergstrand, S., Zelenika, S., Tonmueanwai, A., Tsai, C., Shihua, W., Kruger, O., Souza, M., Salgado, J., Ramotowski, Z. "Calibration of Surface Roughness Standards", Metrologia, 53 :Technical Supplement (2016) : 04001 |
| 27. | Celik, M., Sahin, E., Yandayan, T., Hamid, R., Akgoz, S.A., Ozgur, B., Cetintas, M., Demir, A. "Application of the Differential Fabry?Perot Interferometer in Angle Metrology", Measurement Science and Technology, 27:3 (2016) : 035201 |
| 28. | Ganioglu, O., Un, I. "First Interlaboratory Comparison on Calibration of Diameter Standarts in Turkey", 21st IMEKO World Congress on Measurement in Research and Industry, Prague:30 August-4 September 2015, -:- (2015) : 1-3 |
| 29. | Mudronja, V., Simunovic, V., Acko, B., Matus, M., Bánrét, E., István, D., Thalmann, R., Lassila, A., Lillepea, L., Picotto, G.B., Bellotti, R., Pometto, M., Ganioglu, O., Un, I., Salgado, J.A., Georges, V. "Final report on EURAMET.L-S21: `Supplementary comparison of parallel thread gauges'", Metrologia, 52:Technical Supplement (2015) : 04003 |
| 30. | Yandayan, T., Ozgur, B. "A Motorised 5 m Tape Comparator for Traceable Measurements of Tapes and Rules", Measurement, 49: (2014) : 113-125 |
| 31. | Yandayan, T., Akgoz, S.A., Asar, M. "Calibration of High-Resolution Electronic Autocollimators with Demanded Low Uncertainties Using Single Reading Head Angle Encoders", Measurement Science and Technology, 25:1 (2014) : 015010 |
| 32. | Yandayan, T., Ozgur, B., Karaboce, N., Yaman, O. "High Precision Small Angle Generator for Realization of the SI Unit of Plane Angle and Calibration of High Precision Aucollimators", Measurement Science and Technology, 23:9 (2012) : 094006 |
| 33. | Bagci, E. "Monitoring and Analysis of MRR-Based Feedrate Optimization Approach and Effects of Cutting Conditions Using Acoustic Sound Pressure Level in Free-Form Surface Milling", Scientific Research and Essays, 6:2 (2011) : 256-277 |
| 34. | Kurt, M., Bagci, E. "Feedrate Optimisation/Scheduling on Sculptured Surface Machining: A Comprehensive Review, Applications and Future Directions", International Journal of Advanced Manufacturing Technology, 55:9-12 (2011) : 1037-1067 |
| 35. | Bagci, E. "3-D Nmerical Analysis of Orthogonal Cutting Process Via Mesh-Free Method", International Journal of Physical Sciences, 6:6 (2011) : 1267-1282 |
| 36. | Kurt, M., Bagci, E., Kaynak, Y. "Application of Taguchi Methods in the Optimization of Cutting Parameters for Surface Finish and Hole Diameter Accuracy in Dry Drilling Processes", International Journal of Advanced Manufacturing Technology, 40:5-6 (2009) : 458-469 |
| 37. | Kurt, M., Kaynak, Y., Bagci, E., Demirer, H., Kurt, M. "Dimensional Analyses and Surface Quality of the Laser Cutting Process for Engineering Plastics", International Journal of Advanced Manufacturing Technology, 41:3-4 (2009) : 259-267 |
| 38. | Bagci, E. "Reverse Engineering Applications for Recovery of Broken or Worn Parts and Re-Manufacturing: Three Case Studies", Advances in Engineering Software, 40:6 (2009) : 407-418 |
| 39. | Kurt, M., Kaynak, Y., Bagci, E. "Evaluation of Drilled Hole Quality in Al 2024 Alloy", International Journal of Advanced Manufacturing Technology, 37:11-12 (2008) : 1051-1060 |
| 40. | Bagci, E., Ozcelik, B. "Effects of Different Cooling Conditions on Twist Drill Temperature", International Journal of Advanced Manufacturing Technology, 39:9-10 (2007) : 867-877 |
| 41. | Aykut, S., Bagci, E., Kentli, A., Yazicioglu, O. "Experimental Observation of Tool Wear, Cutting Forces and Chip Morphology in Face Milling of Cobalt Based Super-Alloy with Physical Vapour Deposition Coated and Uncoated Tool", Materials & Design, 28:6 (2007) : 1880-1888 |
| 42. | Bagci, E., Ozcelik, B. "Influence of Cutting Parameters on Drill bit Temperature in Dry Drilling of AISI 1040 Steel Material Using Statistical Analysis", Industrial Lubrication and Tribology, 59:4 (2007) : 186-193 |
| 43. | Bagci, E., Aykut, S. "A study of Taguchi Optimization Method for Identifying Optimum Surface Roughness in CNC Face Milling of Cobalt-Based Alloy (Stellite 6)", International Journal of Advanced Manufacturing Technology, 29:9-10 (2006) : 940-947 |
| 44. | Bagci, E., Isik, B. "Investigation of Surface Roughness in Turning Unidirectional GFRP Composites by Using RS Methodology and ANN", International Journal of Advanced Manufacturing Technology, 31:1-2 (2006) : 10-17 |
| 45. | Yandayan, T. "Application of the Novel Technique for Calibration of 23-Sided Polygon Angles with Non-Integer Subdivision of Indexing Table", VDI Berichte, -:1860 (2004) : 769-774 |
| 46. | Yandayan, T., Ozgur, B. "5 m-Measurement System for Traceable Measurements of Tapes and Rules (Recent Developments in Traceable Dimensional Measurements II, San Diego 4-6 August 2003)", Proceedings of SPIE - The International Society for Optical Engineering, 5190:- (2003) : 419-430 |
| 47. | Yandayan, T., Akgoz, S.A., Haitjema, H. "A Novel Technique for Calibration of Polygon Angles with Non-Integer Subdivision of Indexing Table", Precision Engineering, 26:4 (2002) : 412-424 |